Horn dimensions calculator The pin-fed waveguide pyramidal horn antenna is a common antenna that is widely used in systems which require a high efficiency directive antenna. This type of antenna is built by means of flaring the front of an open ended waveguide, this flare takes on the shaped of …
Horn dimensions calculator The aperture-fed waveguide horn antenna is a common antenna that is widely used in systems which require a high efficiency directive antenna. This antenna is built nearly identically to the pin-fed waveguide horn antenna, except for the fact that it is not fed via a coaxial connector. …
The monopole antenna is an common antenna that is often used on vehicles and other areas were a large conductive flat area is present (“ground plane”). The standard monopole antenna measures 1/4 wavelength in height (λ/4); however, this antenna must be placed on to a large conductive surface to function …
The microstrip patch antenna takes on many forms and has been widely used in the past due to its low profile and ease of manufacturing. There are many different types of microstrip patch antennas, and many of them can be found in the MicrowaveTools Antenna A-Z database. While this type …
The corner reflector antenna is one of the many types of antennas that is fundamentally based on the standard dipole antenna, with one major difference. This antenna adds a reflecting corner to the dipole creating a directional antenna. This antenna often uses a dipole as the radiating element, however a …
The dipole antenna is the basis of many different antennas. The standard dipole antenna measures 1/2 wavelength total, with each side of the dipole maintaining a length of 1/4 of a wavelength. Each side of the antenna is fed 180° out of phase from the other side of the antenna. …
